John Deere OMM141979 J9 - Manual (Page 28)

Storage - 24
STORAGE
Storage
Storing Tiller
1. Remove tiller from tractor. (See the REMOVING
section.)
2. Clean tiller with water pressure.
3. Check belts. If necessary, get new belts from your
Authorized Service Center. DO NOT install the new belts
until you take tiller out of storage.
4. Replace or repair badly worn or damaged parts.
5. Paint scratched areas to prevent rust.
6. Lubricate two grease points. (See the SERVICE
section.)
7. Store tiller on a hard, level surface in a clean, dry place.
If you must store tiller outside, cover it with a waterproof
cover.