Jabra PRO 9460 - Manual (Page 16)

16
en
g
li
sh
Jabra PRO 9460, Jabra PRO 9460 DuO, Jabra PRO 9465 DuO anD Jabra PRO 9470 useR manual
Applying Power to the Base
Connect the mains power adapter to the port marked
on the base, and then plug the adapter into a mains
power socket, as shown in the figure below.
Figure 9: Powering the base
Assembling the Headset
Jabra PRO headsets — other than the Jabra PRO 9460 Duo and Jabra PRO 9465 Duo — can be worn in any of
several wearing styles, including headband, ear hook and neckband.
ear hook and headband wearing-style attachments are included in the standard packages. the neckband is
included as standard for Jabra PRO 9470 but must be ordered separately for Jabra PRO 9460. Jabra PRO 9460 Duo
and Jabra PRO 9465 Duo are always worn as headbands and do not require any assembly.
Figure 10: Assembling and wearing the Jabra PRO headset in various styles
Choose a style and assemble the headset so that it will fit to your preferred ear. see Section 7.2: Attaching or
detaching a Wearing Style for detailed instructions.
Important: Regardless of which wearing style you choose, always be sure to adjust the headset so that
the microphone is positioned as close to your mouth as possible. this will maximize the noise-cancelling
effect of the microphone and make sure that you voice comes through loud and clear.