Jabra PRO 9460 - Manual (Page 45)

45
en
g
li
sh
Jabra PRO 9460, Jabra PRO 9460 DuO, Jabra PRO 9465 DuO anD Jabra PRO 9470 useR manual
Headset state LED when battery level is good LED when battery level is low
Power turned on
green 100ms
Off 100ms
Repeats to a total of 4 times green 100ms
Off 100ms
Repeats to a total of 4 times
Power turned off
Red 100ms
Off 100ms
Repeats to a total of 4 times Red 100ms
Off 100ms
Repeats to a total of 4 times
Pairing
Constant blue Constant red
Pairing succeeded
Blue 100ms
Off 100ms
Repeats to a total of 5 times Red 100ms
Off 100ms
Repeats to a total of 5 times
Charging
Constant yellow
fully charged in cradle no light n/a
Table 6: Headset visual signals and their meanings
7.4 BatteRy indicatoRS, RechaRge and RePlaceMent
Battery indicators
the headset and touchscreen base indicate the current headset battery level as follows:
- whenever the battery is low, the headset multicolor leD will display red for all of its usual signals.
- while the battery is low, you will hear an audio signal (two quick, low tones) every minute or so in the
headset.
- when the headset is paired with a touchscreen base, you can read the current battery level on the
touchscreen.
Recharging the Headset
to recharge your headset battery, place the headset in its cradle on the base. see also Section 4.3: Preparing the
base and Assembling the Headset.