Jabra PRO 9460 - Manual (Page 31)

31
en
g
li
sh
Jabra PRO 9460, Jabra PRO 9460 DuO, Jabra PRO 9465 DuO anD Jabra PRO 9470 useR manual
Note: if the target phone is shown greyed out on the touchscreen, it means that the phone has become
disconnected. this can only occur with mobile- or softphones and Cisco desk phones. you need to either
re-connect the phone or touch another phone on-screen to select a different target. see the figure
below.
Figure 36: A disconnected target phone is shown greyed out on the touchscreen
6.3 how to Make a call
Calling through a Desk Phone
Figure 37: Placing a call with your headset and desk phone
to place a call through your desk phone:
1. If necessary, set the desk phone as the current target for your headset (see also Section 6.2: The Target Phone
Concept.)
2. to get a dial tone:
If you are using a handset lifter or electronic-hookswitch:
Open the audio link to the headset by doing one of the following:
- tap the headset’s multifunction button, or
- touch the call icon on the base touchscreen, or
- lift the headset from the cradle on the base (if automatic opening of the audio link is enabled, see the sec-
tion “Headset Docking-Operation”).
you should now hear a dial tone.