John Deere 5083EN - Manual (Page 407)

CODE
ATTACHMENT
IDENTIFIER
DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
REAR ROCKSHAFT AND HITCH ...Continued...
2520 8200 Lb. Capacity 3-Point Hitch (Category 3N/2) with two Telescopic Draft Links,
Secondary Chain Support and Sway Blocks
Requires Code 0250.
Same Price
REAR AXLES AND WHEELS
3020 Flanged Rear Axle (8x275mm Bolt Circle)
Requires Code 4602 or 4632.
In Base Price
3001 Rack and Pinion Axle 3.385 In. (86mm) Diameter by 96 In. Length 1,235.00
3002 Rack and Pinion Axle 3.385 In. (85mm) Diameter by 110.5 In. Length 1,718.00
HYDRAULIC SYSTEM
7281 Load Sensing Constant Flow Hydraulic System 21.1 GPM (80 L/min) In Base Price
7282 Pressure and Flow Compensated Hydraulic System 29 GPM (110 L/min) 1,560.00
SELECTIVE CONTROL VALVES
7211 Single Basic SCV (No Detent - 101 Series) with Standard Couplers
Only with Code 7281.
In Base Price
7241 Third Deluxe SCV (3 Detents - 301 Series) with Standard Couplers and Power Beyond for
Loader Prep
Requires Code 7281 (PC Hyd System). Includes second Deluxe SCV with standard couplers.
3-SCVs with Power Beyond for Loader Prep and Power Beyond for rear implement usage are
not a compatible configuration with the Pressure Compensated Hydraulic System. If this
combination is required, it is recommended to order the P&FC Hydraulics which can
accommodate, 4-SCVs, Power Beyond for Loader Prep and Power Beyond.
1,515.00
7240 Second Deluxe SCV (3 Detents - 301 Series) with Standard Couplers
Only with Code 7281.
1,307.00
7242 Third Deluxe SCV (3 Detents - 301 Series) with Standard Couplers
Only with Code 7281. Includes second Deluxe SCV with standard couplers.
1,442.00
7244 Third Deluxe SCV (3 Detents - 300 Series) with Deluxe Couplers
Only with Code 7282. Includes second Deluxe SCV with deluxe couplers.
1,485.00
ATTACHMENTS - ORDER AS DESIRED
Customer Gold Key Program:
9075 Gold Key Tour
Not compatible with Code 9076.
This personal guided tour strives to provide you with the unique opportunity to watch your
machine during its final stages of manufacturing. This tour is limited by factory daily
production allowance levels and may have an increased lead-time. A target tour date will be
communicated in advance, but a date will not be firmed up until approximately 6 business days
in advance for this tour and this date is subject to change up to the tour date. For more
information, visit www.deere.com/goldkey.
No Charge
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
7330 Open Operator Station Tractor
Continued
16 May 2012 US & Canada
2-Tractors-05200- 5