John Deere 5083EN - Manual (Page 700)

CODE
ATTACHMENT
IDENTIFIER
DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENTS - ORDER AS DESIRED ...Continued...
841K Auxilary CommandArm Mounted SCV Controls
Highly recommended when Codes 8407, 8408, 8409, 8410, or 8411 are selected with Codes
2050, 2052, 2059, 2057, 2061, 2063, 2062, or 2065.
1,154.00
841L Joystick Control
Required when Codes 8407, 8408, 8409, 8410, or 8411 are selected with Codes 2051, 2053,
2055, 2058, 2060, or 2064.
1,166.00
8435 Drawbar Clevis, Cat. 3 with 1.5 In. (38 mm) Pin
Requires Code 4320.
231.00
Hydraulics:
832G Auxiliary Hydraulic Connections
Includes (2) motor return 1/2" couplers, (1) flat face sump 3/8" coupler, (1) 1/2" power beyond
pressure, (1) load sense 1/4" coupler.
840.00
834B Mid-Mount EH Valve Stack with 2-Function Paddle Pot Control
Provides two additional SCVs .
Float position included on all Mid-Mount valves.
Includes two sets of Mid-Mount valve couplers.
Not compatible with Front Hitch or Loader Ready Package.
Not compatible with AutoQuad or PowrQuad Transmissions.
2,437.00
834C Mid-Mount EH Valve Stack with 2-Function Joystick Control
Provides two additional SCVs.
Float position capable on only 1 Mid-Mount valve.
Includes two sets of Mid-Mount valve couplers.
Not compatible with Front Hitch or Loader Ready Package.
3,190.00
834L Mid-Mount EH Valve Stack with 3-Function Paddle Pot Control
Provides three additional SCVs.
Float position included on all Mid-Mount valves.
Includes three sets of Mid-Mount valve couplers.
Not compatible with Front Hitch or Loader Ready Package.
Not compatible with 6 Rear SCV's.
Not compatible with AutoQuad or PowrQuad Transmissions
3,566.00
834M Mid-Mount EH Valve Stack with 3-Function Joystick Control
Provides Three Additional SCVs
Float position capable on only 1 Mid-Mount valve.
Includes three sets of Mid-Mount valve couplers.
Not compatible with Front Hitch or Loader Ready Package.
Not compatible with 6 Rear SCV's.
4,319.00
Front PTO:
8380 PTO, Independent Front with 1-3/8 In. 21-Spline, 1000rpm
Clockwise-Rotating Shaft as Viewed from Front (Type 2)
Requires Code 8407, 8408, 8409, 8410, 8411.
7,268.00
8381 PTO, Independent Front with 1-3/4 In. 20-Spline, 1000rpm
Clockwise-Rotating Shaft as Viewed from Front (Type 3)
Requires Code 8407, 8408, 8409, 8410, 8411.
7,268.00
Engine:
8302 Heater, Engine Block 110V 53.00
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
7230R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06100- 28