John Deere 5083EN - Manual (Page 921)

CODE
ATTACHMENT
IDENTIFIER
DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...
8011 Fenders, Deluxe Pivoting Front for MFWD or ILS - 620 mm (24.4 In.) Wide
Recommended for use with 480 mm (18.9 In.) to 620 mm (244 In.) tire widths.
Not for use with front dual tire combinations.
Code 8010 or 8011 is required for 50 km/h (31 mph) Tractors.
Not compatible with option Code 8010 Fender, Deluxe Pivoting Front for MFWD or ILS - 480
mm (18.9 In.) Wide.
1,457.00
8020 Fenders, Full Coverage Rear 2.55 m (100 In.) Width
Includes hitch control switch on both fenders.
Not compatible with Code 8021 Fenders, Extra Width Coverage Rear 2.75 m (108 In.) Width.
1,222.00
8751 Trailer Brake, Air Dual Line System
Includes compressor, tank, control valves and 2 line couplers.
Not compatible with Code 8756 Hydraulic Trailer Brakes.
If Air and Hydraulic Trailer Brakes are required, order Code 8752 Trailer Brakes, Air Dual
Line and Hydraulic.
6,358.00
8752 Trailer Brake, Air Dual Line and Hydraulic
Includes rear Tractor line hydraulic coupler.
Includes compressor, tank, control valves and couplers.
Not compatible with Codes 8751 or 8756.
7,147.00
8756 Trailer Brake, Hydraulic
Includes rear Tractor line hydraulic coupler.
Not compatible with Code 8751 Trailer Brake, Air Dual Line or Code 8752 Trailer Brake, Air
Dual Line and Hydraulic.
789.00
Front Implement:
8380 PTO, Independent Front with 35 mm (1-3/8 In) 21-Spline, 1000 rpm
Clockwise-Rotating Shaft as Viewed from Front (Type 2)
Only available on Model Year 2012 Tractors.
For Code 8336 IT4/ Stage IIIB Compliant Engine.
Requires Front Hitch Code 8411. Requires ILS Front Axle Code 6060 or 6061.
Not compatible with group 42 Front Tires. Not compatible with Powershift Transmission Code
1490.
7,268.00
8381 PTO, Independent Front with 45 mm (1-3/4 In) 20-Spline, 1000 rpm
Clockwise-Rotating Shaft as Viewed from Front (Type 3)
Only available on Model Year 2012 Tractors.
For Code 8336 IT4/ Stage IIIB Compliant Engine.
Requires Front Hitch Code 8411. Requires ILS Front Axle Code 6060 or 6061.
Not compatible with group 42 Front Tires. Not compatible with Powershift Transmission Code
1490.
7,268.00
8382 PTO, Independent Front with 35 mm (1-3/8 In) 6-Spline, 1000 rpm,
Counter-Clockwise Rotating Shaft as Viewed from Front (Type 1)
For Code 8336 IT4/ Stage IIIB Compliant Engine.
Requires Front Hitch Code 8411. Requires ILS Front Axle Code 6060 or 6061.
Not compatible with group 42 Front Tires. Not compatible with Powershift Transmission Code
1490.
Available in Australia and New Zealand. Requires Destination Code 0230 Australia or Code
0237 New Zealand.
7,268.00
8383 PTO, Independent Front with 35 mm (1-3/8 In) 21-Spline, 1000 rpm
Clockwise-Rotating Shaft as Viewed from Front (Type 2)
Only available on Model Year 2012 Tractors.
For Code 8334 Stage II Compliant Engine.
Requires Front Hitch Code 8411. Requires ILS Front Axle Code 6061.
Not compatible with group 42 Front Tires.
Not compatible with Powershift Transmission Code 1490.
7,268.00
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
8310R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06700- 25