JVC DYNAPIX LCD IDTV WITH D.I.S.T. LT-32D50BJ - Manual (Page 14)

14
Setting up your TV
LT-32/26D50BJ/SJ / LCT1703-001A-U / ENGLISH
Do not turn the TV off in the following
cases.
• when recording images from an external
device connected to the TV (for example
a camcorder)
• when recording a TV channel after it has
been unscrambled on a decoder
• when recording a TV channel by using the
TV’s output because the VCR’s own
tuner cannot properly receive that
channel.
• when recording Digital terrestrial
broadcasting (DVB-T).
If you change channels or perform
other operations while a Digital
terrestrial broadcasting (DVB-T)
channel is being recorded, a window
appears asking whether to stop the
recording.
Press the a button to stop the
recording, or the
TV/DTV button to
continue the recording.
When the VCR is not ready, the following
messages are displayed.
Refer to the VCR instruction manual.
ERROR
MESSAGE
Cause and
countermeasure
NO
RECORDING
The VCR is not able to
record.
Check the VCR.
NO
RECORDING
POSSIBLE
The TV input is set to EXT-4
or PC. Since the EXT-4
picture or PC picture cannot
be output to EXT-2, DIRECT
REC is not possible.
NO
RECORDING,
MEDIA
PROBLEM
The RECORDING DEVICE
is not ready to record. Check
the VCR tape.
NO
RECORDING,
DEVICE BUSY
The RECORDING DEVICE
cannot record as it is
recording or playing. Check
the VCR.
LT-32&26D50BJSJ_Eng.book Page 14 Wednesday, September 8, 2004 2:59 PM