JVC DYNAPIX LCD IDTV WITH D.I.S.T. LT-32D50BJ - Manual (Page 18)

18
Basic operations (Remote control)
LT-32/26D50BJ/SJ / LCT1703-001A-U / ENGLISH
Turn the TV on or off from
standby mode
Press the # (standby) button to turn
the TV on or off.
When the TV is turned on, the power lamp
lights green.
• The power can be turned on by pressing
the TV/DTV button, p p buttons or
Number buttons.
Choose a TV channel and
watch images from external
devices
„ Switching between Digital
terrestrial broadcasting (DVB-T)
and Analogue terrestrial
broadcasting.
Press the TV/DTV button.
The broadcasting is switched every time the
button is pressed.
„ Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
• PR 123 → press 1, 2 and 3
„ Use the p p buttons:
Press the p p buttons to
choose the programme number
(PR) you want.
• For Digital terrestrial broadcasting (DVB-
T), if the FAVOURITE setting in the
“Edit PR List” (see page 32) has been set,
only that programme number (PR) can be
chosen.
• For Analogue terrestrial broadcasting, an
EXT terminal can also be chosen.
„ Use the AV button:
Press the AV button to choose an
EXT terminal.
• You can choose a video input signal from
the S-VIDEO signal (Y/C signal) and
regular video signal (composite signal).
For details, see “S-IN (S-VIDEO input)”
on page 59.
• If you do not have a clear picture or no
colour appears, change the colour system
manually. See “COLOUR SYSTEM” on
page 48.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output from
an external device. (The EXT-3 terminal
does not support this function.)
– When EXT-4 is chosen, motion differs
according to the “COMPONENT
AUTO SELECT” setting in the SET
UP menu.
For details, see “COMPONENT AUTO
SELECT” on page 58.
To turn the TV on or off, set the VCR/TV/
DVD switch on the remote control to the
TV position and press the # button.
If the VCR/TV/DVD switch on the remote
control is set to a position other than TV,
the TV will not be turned on or off even if
the # button is pressed.
EXT-1
Analogue
terrestrial
broadcasting
Digital
terrestrial
broadcasting
(DVB-T)
PC
EXT-2
EXT-4
EXT-3
E3 S3
E1 or S1 S2 E2
E4
or
or
TV mode EXT modes
LT-32&26D50BJSJ_Eng.book Page 18 Wednesday, September 8, 2004 2:59 PM