Connecting the aerial – JVC DYNAPIX LCD IDTV WITH D.I.S.T. LT-32D50BJ User Manual

Page 9

Advertising
background image

Setting up your TV

9

LT-32/26D50BJ/SJ / LCT1703-001A-U / ENGLISH

Connecting the aerial

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.

Caution

• Turn off all the equipment including the TV before connecting anything.

„

If you connect via a device with an

antenna terminal such as a VCR,

follow A

B C D in the

diagram opposite.

„

If you connect the antenna

directly to the TV, follow 1

C.

To use the T-V LINK functions, you must

have a T-V LINK compatible VCR

connected by a SCART cable D to the EXT-

2 terminal on the TV. For details about T-V

LINK functions, see “T-V LINK functions”

on page 13.

• The two-way splitter is not included.

Please supply one separately.

• If you are not going to watch Analogue

terrestrial broadcasting, only connect C.

In this case, a two-way splitter is not

necessary.

• To connect more equipment, please see

“Connecting external equipment” on

page 63.

• To connect additional audio equipment,

see “Connecting speakers/amplifier” on

page 66.

• If you connect a decoder to a T-V LINK

compatible VCR, set the DECODER

(EXT-2) function to ON. For details, see

“” on page 57.

Otherwise, you will not be able to watch

scrambled channels.

• When receiving Digital terrestrial

broadcasting (DVB-T), reception can

suddenly be lost if the signal becomes

weak. Use a correctly installed high-

performance antenna.

• When connecting via a device with an

antenna terminal such as a VCR, depending

on the connection method, the signal may

be weakened. If this happens, use a booster

to increase the signal strength.

• In areas with a lot of radio communication

such as near ports or airports, noise may

be introduced into the picture or sound. In

such cases, reception may be improved by

using a high-performance antenna.

• Read the instruction manual of the

devices which you connect to the TV.

75-ohm

Coaxial

Cable

21-pin

SCART

Cable

without terminal covers

75-ohm

Coaxial

Cable

To Aerial

Output

To Aerial

Input

VCR

Aerial

AV IN/OUT

Terminal

75-ohm

Coaxial

Cable

Two-way

splitter

(Not supplied)

IN

OUT

OUT

LT-32&26D50BJSJ_Eng.book Page 9 Wednesday, September 8, 2004 2:59 PM

Advertising