JVC DYNAPIX LCD IDTV WITH D.I.S.T. LT-32D50BJ - Manual (Page 53)

53
LT-32/26D50BJ/SJ / LCT1703-001A-U / ENGLISH
SET UP menu
• AUTO PROGRAM, EDIT/MANUAL,
and DECODER (EXT-2) cannot be
chosen when watching Digital terrestrial
broadcasting (DVB-T).
AUTO PROGRAM (Analogue)
You can again perform the AUTO
PROGRAM function TV channel automatic
registration which was performed in the
“Initial settings” (page 10).
To receive SKY 1 you need a satellite tuner.
You must have the satellite tuner set to SKY
1 before starting the AUTO PROGRAM
function.
1 Choose AUTO PROGRAM, then
press the a or 3 button
The COUNTRY menu appears.
2 Perform any extra operations you
need to perform in step 5
(operations after AUTO PROGRAM
ends) and step 6 of “Initial
settings”
EDIT/MANUAL (Analogue)
The EDIT/MANUAL functions are divided
into two types:
• editing the current programme numbers
(PR) (EDIT functions); and
• manually storing a TV channel you want
to view on a particular programme
number (PR) (MANUAL function).
Here are the details about these functions:
MOVE:
This function changes the programme
number (PR) of a TV channel.
ID:
This function registers a channel name (ID)
to a TV channel.
INSERT:
This function adds a new TV channel in the
current programme numbers (PR) list by
using the CH number.
• You cannot use the INSERT function if
you do not know the channel number of a
TV channel. Use the MANUAL function
to register a TV channel in the programme
number (PR).
DELETE:
This function deletes a TV channel you do
not want to list.
MANUAL:
This function manually stores a new TV
channel in a programme number (PR).
Caution
• Using the MOVE, DELETE or INSERT
functions rewrites the current programme
numbers (PR) list. Therefore, the
programme numbers (PR) of some of the
TV channels will change.
• Using the MANUAL function for a TV
channel for which the CHILD LOCK
function has been set cancels the CHILD
LOCK function for that channel.
• Using the MANUAL function for a TV
channel for which the DECODER (EXT-2)
function has been set to ON returns the
setting of the DECODER (EXT-2) function
for that channel to OFF.
• When a TV channel has already been
registered in PR 99, using the INSERT
function deletes that TV channel.
D0029
SET UP
AUTO PROGRAM
EDIT/MANUAL
OK
-EN
DECODER(EXT-2)
COMPONENT AUTO SELECT
EXT SETTING OFF
OFF
LT-32&26D50BJSJ_Eng.book Page 53 Wednesday, September 8, 2004 2:59 PM