Assigning titles to the stations – JVC W-XC406 User Manual
Page 11
11
ENGLISH
4
Finish the procedure.
To erase the entire title
In step
3 on the left...
To change the information shown on the
display
* If no title is assigned, “NO NAME” appears
for a while.
Available characters
Upper case
Lower case
Numbers and symbols
Assigning titles to the stations
You can assign titles to 30 station frequencies
(including both FM and AM). Each station
name can be assigned up to 10 characters.
However, you cannot assign title to the station
frequency stored in the EX button.
1
Tune in to the station you would like
to assign a title to.
2
Enter the assigning mode.
3
Assign a title.
1 Select a character set.
2 Select a character.
3 Move to the next (or previous)
character position.
4 Repeat steps 1 to 3 until you
finish entering the title.
Station frequency
(and Preset no.)
Assigned title*
EN06-13_KW-XC406_405[U]f.indd 11
EN06-13_KW-XC406_405[U]f.indd 11
7/26/05 9:27:52 AM
7/26/05 9:27:52 AM