JVC W-XC406 - Manual (Page 32)

2
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. However, you should make adjustments
corresponding to your specific car. In this case consult the manual included with the installation
kit (option).
In some case, depending of the type and the model of your car, it is not possible to install the
unit into the center console.
If you have any questions or require information regarding installation kits, consult your
JVC car audio dealer or a company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Before installing the unit
• When mounting the unit, be sure to use the screws provided, as instructed. If other screws are
used, there is a possibility that parts could become loose or damaged.
• When tightening screws or bolts be careful not to pinch any connection cord.
1
Remove the audio system originally installed together with the mounting brackets.
Note: Be sure to keep all the screws and parts removed from your car for future use.
2
Attach the mounting brackets (removed from the car), to this unit (see below).
3
Connect the wires (see diagram ).
4
Fix this unit to the car using the screws removed in step 1.
• See “Caution” below.
The following example shown is for installation in a Toyota. For more details, consult
your JVC car audio dealer.
Securely connect the ground wire to the metal body
of the car using the screw originally fixed to the
metal body of the car.
µËÕ “¬¥‘π‡¢И“°—∫‚§√Я‚≈А–¢ХЯ√∂„АИ·πЛπ¥И«¬ °√Ÿ∑’Л¬ч¥‚§√Я‚≈А–¢ХЯ√∂
Mounting bracket removed from the car
·∑Лπ√ХЯ√—∫∑’Л∂Х¥ХХ°®“°√∂
Screws supplied for this unit
°√Ÿ∑’Л„АИ¡“ж√ИХ¡µ—«‡§√◊ËÕß
Mounting bracket removed from the car
·∑Лπ√ХЯ√—∫∑’Л∂Х¥ХХ°®“°√∂
Screws supplied for this unit
°√Ÿ∑’Л„ж’ж√СХ∫°н∫‡§√’ЛХЯ Screw removed from the car in step 1
°√Ÿ∑’Л∂Х¥ХХ°®“°√∂„π¢—ÈπµÕπ∑’Ë 1
Install the unit at an angle of less than 30°.
µ‘¥µ—ИЯ™я¥ª√–°Х∫∑’Л¡я¡µЛ”°«Л“ 30 ХЯ»“
Less than 30˚
µЛ”°«Л“ 30 ХЯ»“
If there is an interfering tab on the mounting bracket, bent it flat.
А“°¡’ Л«π∑’ˬ◊ËπÕÕ°¡“®“°·∑Лπ√ХЯ√—∫ „АИ¥—¥ Л«π¥—Я°≈Л“«„АИ√“∫≈Я
°“√µ‘¥µ—Èß (°“√ª√–°Õ∫·ºßÀπÈ“ª—∑¡П‡¢И“)
¿“жµ—«Х¬Л“ßµËÕ‰ªπ’И· ¥Я°“√µ‘¥µ—ИЯ·∫∫∑—Л«‰ª Х¬Л“Я‰√°Бµ“¡§я≥ “¡“√∂∑”°“√ª√—∫‰¥Иµ“¡≈—°…≥–¢ХЯ√∂§я≥ „π°√≥’¥—Я°≈Л“«
‚ª√¥µ‘¥µЛХ¢Х§”·π–π”®“°µ—«·∑π®”АπЛ“¬‡§√◊ЛХЯ‡ ’¬Я JVC А√◊Х∫√‘…—∑∑’Л®—¥®”АπЛ“¬™я¥ª√–°Õ∫ (Хяª°√≥П‡ √‘¡)
„π∫“ß°√≥’ ¢÷ÈπÕ¬ŸË°—∫™π‘¥·≈–√яЛπ¢ХЯ√∂¬πµП ‡ж√“–Х“®µ‘¥µ—ИЯ‡§√◊ЛХЯ‰«И∑’Лµ”·ÀπËߧХπ‚´≈°≈“Я‰¡Л‰¥И
А“°§я≥¡’¢ИХ Я —¬А√◊ÕµÈÕß°“√¢ÈÕ¡Ÿ≈‡ж‘Л¡‡µ‘¡‡°’Л¬«°—∫™я¥ª√–°Õ∫ ‚ª√¥µ‘¥µËÕµ—«·∑π®”АπЛ“¬‡§√◊ЛХЯ‡ ’¬Я√∂¬πµП JVC
А√◊Х∫√‘…—∑∑’Л®—¥®”АπЛ“¬™я¥ª√–°Х∫
• А“°§я≥‰¡Л¡—Лπ„®„π«‘∏’°“√µ‘¥µ—ИЯ‡§√◊ЛХЯ‡ ’¬ЯХ¬Л“Я∂Ÿ°«‘∏’ ‚ª√¥„АИ™Л“ßºŸÈ™”π“≠∑”°“√µ‘¥µ—ИЯ‡∑Л“π—Èπ
°ËÕπ°“√µ‘¥µ—ИЯµ—«‡§√◊ЛХЯ
• ‡¡◊ЛХ®–∑”°“√µ‘¥µ—ИЯµ—«‡§√◊ЛХЯ ‚ª√¥„™È °√Ÿ∑’Ë·π∫¡“µ“¡∑’Ë·π–π” А“°§я≥¬ч¥‡§√◊ЛХЯ¥И«¬ °√Ÿ·∫∫Õ◊Лπ Х“®∑”„АИ™‘Иπ Л«πА≈«¡А√◊Х
‡°‘¥§«“¡‡ ’¬А“¬‰¥И
• ‡¡◊ЛХ®–¢—π·πËπ °√ŸА√◊Х ≈—°‡°≈’¬« µÈÕß√–«—Я‰¡Л„ÀÈÀπ’∫ “¬‡™◊ËÕ¡µЛХ
1 ∂Х¥≈”‚жЯ∑’Лª√–°Х∫‡¢И“‰ª°—∫·∑Лπ√ХЯ√—∫
А¡“¬‡Аµя: ‚ª√¥‡°Á∫ °√Ÿ·≈–™‘Иπ Л«π∑—ИЯА¡¥∑’Л∂Х¥ХХ°‰«И„™ИЯ“π„π§√“«µËÕ‰ª
2 ª√–°Õ∫·∑Лπ√ХЯ√—∫ (∑’Л∂Х¥ХХ°®“°√∂) ‡¢И“°—∫µ—«‡§√◊ËÕß (‚ª√¥¥Ÿ¥È“π≈Л“Я)
3 µЛХ “¬‰ш (‚ª√¥¥Ÿ·ºπº—Я )
4 ¬ч¥µ—«‡§√◊ЛХЯ‡¢И“°—∫√∂¥И«¬ °√Ÿ∑’Л∂Х¥ХХ°„π¢—ÈπµÕπ∑’Ë 1
• ‚ª√¥ÕË“π “ ¢ИХ§«√√–«—Я ” ¥И“π≈Л“Я
µ—«Х¬Л“ßµËÕ‰ªπ’ȇªÁπ°“√µ‘¥µ—ИЯ‡§√◊ЛХЯ√—∫ —≠≠“≥„π√∂¬πµÏ‚µ‚¬µИ“ ”А√—∫√“¬≈–‡Х’¬¥‡ж‘Л¡‡µ‘¡ ‚ª√¥µ‘¥µЛХ¢Х§”·π–
π”‰¥È®“°µ—«·∑π®”АπЛ“¬‡§√◊ЛХЯ‡ ’¬Я√∂¬πµП JVC
Caution:
To install the mounting brackets to the unit, use only the supplied screws (M5 x 8 mm).
If you use any screw longer than 8 mm, the unit can be damaged.
¢ИХ§«√√–«—Я:
„π°“√ª√–°Õ∫·∑Лπ√ХЯ√—∫°—∫µ—«‡§√◊ËÕß ‚ª√¥„™È °√Ÿ ( M5 x 8 ¡¡ . ) ∑’Л„АИ¡“‡∑Л“π—Иπ
А“°§я≥„™И °√Ÿ∑’Л¬“«°«Л“ 8 ¡¡ . Х“®∑”„АИµ—«‡§√◊ЛХЯ‰¥И√—∫§«“¡‡ ’¬А“¬
Screws supplied for this unit:
°√Ÿ∑’Л„ж’ж√СХ∫°н∫‡§√’ЛХЯ:
Select the proper screw type, fitting to your car.
‡≈◊Х°„™С™π‘¥ °√Ÿ„АС‡А¡“– ¡°—∫√∂¢ХЯ§як
Binding screws (M5 x 8 mm)
°√Ÿ¬÷¥ ( M5 x 8 ¡¡ . )
Flat countersunk screws (M5 x 8 mm)
°√ŸÀ—«‡√’¬∫ ( M5 x 8 ¡¡ . )
Instal_KW-XC406_005A.indd 2 15/8/05 1:24:25 PM