JVC W-XC406 - Manual (Page 55)

21
Indications Selectable settings, [reference page]
DIMMER
Dimmer AUTO : [Initial]; Dims the display when you turn on the
headlights.
ON : Activates dimmer.
OFF : Cancels.
CONTRAST
Display contrast 1 – 10 : Adjust the display contrast to make the display indications
clear and legible.
[Initial: 5]
SCROLL* 1
Scroll
ONCE : [Initial]; Scrolls the disc information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing DISP for more than one second can scroll the display regardless
of the setting.
EXT INPUT* 2
External input
CHANGER : [Initial]; To use a JVC CD changer, an Apple iPod, or a
JVC D. player, [13, 22].
EXT INPUT : To use another external component, [22].
AUX ADJUST
Auxiliary
input
level adjustment
AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level
accordingly, to avoid the sudden increase of the output
level when changing the source from external component
connected to the AUX input jack on the control panel.
[Initial: AUX ADJ 00]
TAG DISP
Tag
display
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [15].
TAG OFF : Cancels.
AMP GAIN
Amplifier
gain
control
You can change the maximum volume level of this unit.
LOW PWR
: VOLUME 00 – VOLUME 30 (Select this if the
maximum power of the speaker is less than 50 W to avoid
damaging the speaker.)
HIGH PWR : [Initial]; VOLUME 00 – VOLUME 50
IF FILTER
IF
filter
AUTO : [Initial]; Increases the tuner selectivity to reduce noise
interference between the stations. (Stereo effect will also
be lost.)
WIDE : Subject to noise interference from adjacent stations, but
sound quality will not be degraded and will retain the
stereo effect.
* 1 Some characters or symbols will not be shown (and will be blanked) or substituted on the
display.
* 2 Cannot be selected if the source is “CD-CH” or “EXT.”
EN18-23_KW-XC404[UI]f.indd 21 EN18-23_KW-XC404[UI]f.indd 21 8/3/05 6:20:35 PM 8/3/05 6:20:35 PM