JVC W-XC406 User Manual

Page 26

Advertising
background image

26

ENGLISH

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).

Next time you select “CD” or “CD-CH” for

the playback source, disc play starts from
where it has been stopped previously.

Ejecting a disc

• If the ejected disc is not removed within

15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)

Tape operations

Playing a tape

• While locating a specified tune:

– If the tape is rewound to its beginning,

playback starts from the beginning of that
side.

– If the tape is fast-forwarded to the end, it is

reversed and played from the beginning of
the other side.

• In the following cases, Multi Music Scan

(MMS), Blank Skip, and Repeat Play may not
operate correctly:
– Tapes with tunes having long pianissimo

passages (very quiet parts) or non-recorded
portions.

– Tapes with short non-recorded sections.
– Tapes with high level noise or humming

between tunes.

– The Dolby NR setting does not match. For

example, if the tape is recorded with the
Dolby C NR.

• Do not use the following tape:

– Dirty or dusty tapes.
– Cassette with peeling labels.
– Loose tape which may become entangled

with the mechanism.

Changing the source

• If you change the source, playback also stops

(without ejecting the cassette).

Ignition key-off release

• When you turn off the ignition key with

a cassette in the compartment, the unit
automatically releases the tape from its head.

General settings—PSM

• If you change the “TAG DISP” setting from

“TAG OFF” to “TAG ON” while playing
MP3/WMA file, the tag display will be
activated when the next file starts playing.

• If you change the “AMP GAIN” setting

from “HIGH PWR” to “LOW PWR”
while the volume level is set higher than
“VOLUME 30,” the unit automatically
changes the volume level to “VOLUME 30.”

Other main functions

• If you try to assign a title to the 31st station

frequency, “NAME FULL” flashes. Delete
unwanted titles before assignment.

EN24-29–KW-XC406_405[U]f.indd 26

EN24-29–KW-XC406_405[U]f.indd 26

7/26/05 9:28:35 AM

7/26/05 9:28:35 AM

Advertising