Jensen JMC-1100 - Manual (Page 14)

again to resume playback.
STOP MODE
1. If “STOP” button is pressed during PLAY or PAUSE mode, system will go to stop mode.
SKIP MODE (SKIP UP /SKIP DOWN )
1. During PLAY or PAUSE mode, if “SKIP +” button is pressed it will go to next track and display
the track no. and then remain the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode, if “SKIP -” button is pressed. It will go back to the beginning of
the track, original track no. is display and remains the play or pause mode.
3. After step 2, press “SKIP -” button again will go to the previous track and remain the play or
pause mode.
SEARCH MODE (SEARCH UP /SEARCH DOWN )
1. During PLAY mode, if “SEARCH +” button is pressed & hold for few seconds, it will start
searching forward.
2. During play mode, if “SEARCH -” button is pressed & hold for few seconds, it will star
searching backwards.
REPEAT PLAY
This function allows to repeat 1 single track, 1 single disc or all discs:-
Press the “REPEAT” keys repeatedly to switch the function:-
REP. ALL DISC
REP. 1 DISC REP. 1 TRACK REP. OFF
Note: Single track repeat function is possible in normal or programmed playback, repeat one
disc or all discs is only available in normal playback.
RANDOM PLAY
You can listen all the tracks of all available discs in a random order by this function
1. Press “RANDOM” button once, unit will play all disc randomly; press again, unit will play 1
disc randomly.
2. Press “PLAY/PAUSE” button to start random playback.
3. All tracks of all discs or all tracks of 1 disc will be started playback in random order.
4. Press “RANDOM” button again to cancel random mode.
INTRO PLAY (BY REMOTE ONLY)
You can listen the beginning (10 seconds) of each track in a CD by this function & saving your
time to search the desire song
1. Press “INTRO” button after placing a CD inside the unit at CD mode
2. System start playing the first 10 seconds of each track of the entire CD continuously.
3. Press “INTRO” button once again when it reach your desired track for normal playback.
REMAIN FUNCTION (BY REMOTE ONLY)
In CD playback mode, press to check the remain time on LCD display during CD playback
Press “REMAIN” button repeatedly to switch the function as below:
TRACK PLAYING TIME TRACK REMAINING TIME DISC REMAINING TIME DISC PLAYING TIME
13