Location of controls and indicators – Jensen JMC-1100 User Manual
Page 8
of the main unit by pushing down the lever of the left speaker terminal and then the
right speaker terminal
2. Connect the left speaker to the left speaker terminal with the red wire to L+ and the
black wire to L -.
3. Connect the right speaker to the right speaker terminal with the red wire to R+ and the
black wire to R -.
NOTE:
Make sure that the power is switch off when connect or disconnect the speakers. Make
sure that the speakers are connected to the correct terminals.
CONNECTING THE AC POWER CORD
After connecting the speakers unwind the AC power cord fully and connect it to any convenient
household 12
0V~ 50Hz
AC outlet.
NOTE:
The product is designed to operate on normal 120V~ 60Hz
AC only. Connecting this system to any other power supply
could result in damage to the unit which is not covered by
your warranty. You will noted that this system is equipped
with a polarized AC power plug having one blade wider than
the other. This is a safety feature.
If this plug does not fit into your existing AC outlet, do not try
to defeat this safety feature by filling the wide blade to make
it fit into your outlet. If this plug will not fit into your outlet, you
probably have an outdated non-polarized AC outlet. You
should have your outlet changed by a qualified licensed electrician.
7
LOCATION OF CONTROLS AND INDICATORS