Jensen JMC-1100 - Manual (Page 22)

21
PROBLEM POSSIBLE CAUSE SOLUTION
The unit is disconnected from the
AC outlet Reconnect to the AC outlet.
The unit does not
respond (no
power)
AC outlet is not functioning.
Plug another device into the same
outlet to confirm the outlet is
working.
AM band is too
noisy The reception at the set location is
poor. Slightly rotate the unit for the best
reception.
Radio paused
about 1 second
when switch from
phonograph mode
to tuner mode
This is normal.
Radio will resume normal function in
1-2 seconds.
Volume level is set to high. Decrease the volume.
Sound is distorted
Sound source is distorted.
Try a different audio source such as
a music CD.
CD Mode is not selected.
Slide the FUNCTION switch to select
CD mode.
CD Player does
not play.
CD is not installed or installed
incorrectly. Press the CD onto spindle, printed
side facing up.
CD skip while
playing
Disc is dirty or scratched. Wipe with cloth or another disc.
Unit gets warm
after extended play
at high volume
This is normal
Turn the unit off for a period of time
or lower volume.
SPECIFICATION