Jensen JMC-1100 - Manual (Page 16)

A. RECORDING FROM TAPE (DECK B TO DECK A)
This unit enables you to duplicate a pre-recorded tape to another tape. It is performed only one
way from deck B (playback) to deck A (recording).
DUBBING AT NORMAL SPEED
Press the “ TAPE ” function button.
Inset a pre-recorded cassette into deck B and a blank cassette tape into deck A.
Press the “ PAUSE ” key and then press the “ RECORD ” and “ PLAY ” key at deck A.
Press the “ PLAY ” key to start playback at deck B and then release “ PAUSE ” key at deck A
to start dubbing.
Press “ PAUSE ” key at deck A and “ STOP ” key at deck B when finish.
DUBBING AT HIGH SPEED
This unit is equipped with a high speed dubbing system which can save the time for dubbing by
2/3 when compare to normal speed.
Press the dubbing button to “ HI ” position and then follow the same procedures as stipulated
in “dubbing at normal speed”.
When dubbing a pre-recorded cassette tape at high speed, a chattering sound is being heard.
to avoid this, set the volume control to a minimum level.
Do no active/de-active the “Hi-Nor Dubbing” button during dubbing, this will vary the speed of
recording and may be damage the cassette tape.
B. RECORDING FROM RADIO
Press “RADIO” button to active radio mode
Tune to the desired station and insert a blank cassette tape in deck A.
Press “RECORD” & “PLAY” key to start recording.
Press “PAUSE” keys and then “STOP/EJECT” key when finish.
NOTE: During recording of AM, beating whistle at some reception stations may happen, by
selecting “BEAT CUT 1-2” switch may help to reduce the background noise.
C. RECORDING FROM CD
Press the “CD” function button.
Insert a black cassette tape in deck A which suitable for recording.
Press “PAUSE” key first and then “RECORD” & “PLAY” key at cassette. Recording function is
now on STANDBY.
Activate the CD player, and then press “PAUSE” at cassette to start recording.
To stop recording, press “STOP” button on CD player first, then press the “PAUSE” key and
then “STOP/EJECT” key on cassette tape deck.
15
D. RECORDING FROM PHONO
Press the “PHONO” function button.
Place a record onto turntable and insert a blank cassette tape into deck A.
Press the “ PAUSE ” key and then press the “ RECORD ” and “ PLAY ” key at deck A.
Place tone arm to start playback the record and then release “ PAUSE ” key at deck A to start
dubbing.
Press “ PAUSE ” or “ STOP ” key at deck A when finish.
MORE FEATURES
A. SLEEP TIMER SETTING
1. Press and hold the “ SLEEP/TIMER ” button on main unit or “SLEEP” button on remote, to
active and adjust the sleep timer in the order of 90 > 80 >70….10 minutes automatically.
Release the button at sleep timer you want to select.
2. System will stop and go to STANDBY mode automatically after the selected timing.
3. To cancel the sleep mode, press the “SLEEP/TIMER” button on main unit or “SLEEP” on the
remote once, “ SLEEP ” indicator on the display disappears.