JVC KY-F550 - Manual (Page 18)

E-18
DC IN
POWER
VIDEO OUTPUT
TO CAMERA S(Y/C) OUTPUT
DC 12V=OUTPUT
EITHER
OUTPUT
MAX 1.25A SEE INST-
RUCTION
MANUAL
LENS
DV
VIDEO OUT
TRGGER
REMORT
POWER
RGB, Y/C, SYNC OUT
DC IN
SEE INSTRUCTION MANUAL
2. Preparation Before Shooting (continued)
Notes
● Ensure to make use of AA-P700 for the power supply.
When connecting, ensure that power switch of AA-P700 is turned OFF.
Connecting with the power on may give rise to malfunction of the equipment.
● When power is supplied, it takes several seconds before this unit is operable.
When the “SHUTTER” item under “EXPOSURE” screen is set to “SLOW”, it might take even longer time.
● Allow a 10 second interval after switching off the power before turning on again. If the power switch is
turned ON and OFF too soon, malfunctioning such as startup failure may occur.
Connecting the Power Supply
Connect the [DC IN] terminal at the back of this unit to the [TO CAMERA] terminal of the AC adaptor (AA-
P700) using the power cable supplied (2 m).
● Insert plug fully, turn ring and ensure
that it is fastened.
[DC IN]
Terminal
Ring
Connect the end with
white marking to the
AC adaptor.
White Marking
Plug
(accessories)
Power Cable (2 m)
[TO CAMERA] Terminal
AA-P700 AC Adapter
AC IN
AC 230 V
Caution
In case of medical use
Make sure to use the specified AC Adapter.
UK Market ................................... AA-P700EK
Other European Market ............. AA-P700EG