JVC KY-F550 - Manual (Page 27)

E-27
English
5 / BARS
∞/ AW
SET MENU
1 2 3 4
- - - - - - SYSTEM
NEGA OF F T I VE
CANCE L PEN I P
PAGE BACK
DV SYSTEM JVC
XE L COM
- - - - - - SYSTEM
NEGA ON T I VE
CANCE L PEN I P XE L COM
PAGE BACK
DV SYSTEM JVC
[MENU] [SET] [ 5]
[ ∞]
Output of Negative Image
“SYSTEM” Screen
“SYSTEM” Screen
2. 3.
4. 5.
Make sure that the Switch 4 located at the side of this unit is
set to [OFF] (lower side).
1.
Press the [MENU] button for 1-2 seconds.
The “MENU” screen will be displayed.
2.
Use the [ 5/∞] buttons to select “SYSTEM..”, then press the
[SET] button.
The “SYSTEM” screen will be displayed.
3.
Use the [ 5/∞] buttons to select “NEGATIVE”, then press the
[SET] button.
The set value starts blinking and adjustment is possible.
4.
Use the [ 5/∞] buttons to set value to “ON”, then press the
[SET] button.
This will be recorded in the memory of this unit.
Output image will be converted to negative images.
5.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.
Blinking
It is possible to convert video signals from the various output terminals of this unit into negative images.
Switch 4: [OFF]