White spot correction (continued), E-29 english, White spots correction messages – JVC KY-F550 User Manual

Page 29

Advertising
background image

E-29

English

COMPE

CU

EXE

T I NG

N

PIXEL

COMPE

ERROR : LENS NOT CLOSED?

N

PIXEL

COMPE

ERROR : LENS NOT CLOSED?

N

PIXEL

COMPE

OK

N

TURN POWER OFF

AND ON AGAIN.

PIXEL

COMPE

ERROR : COUNT OVER

N

TURN POWER OFF

AND ON AGAIN.

PIXEL

COMPE

ERROR : COUNT OVER

N

TURN POWER OFF

AND ON AGAIN.

PIXEL

Notes

● The white spot correction feature of this unit does not correct all white spots. Detection and correction of

white spots by this unit is performed under the following conditions. White spot correction will not be
performed under conditions beyond those stated. In cases where conditions are fulfilled, correction may
not be successfully performed depending on the nature of the white spots.
In such case, perform the detection again until white spots are detected.
Consult your JVC authorized dealer if white spots cannot be corrected.
Quantity of Detection/Correction: 32 or less

● The screen on the right may be displayed during detection of white spots

in cases when light enters the CCD during detection or depending on the
condition of white spots. In this case, check if there is light entering the
CCD.

● During white spot correction, pixel data is obtained via interpolation of

pixel information from the surroundings. Thus data may not be accurate
for fine images.

● Results of white spot detection will be stored until the next detection is

performed.

● During white spot detection, operation via the remote control will be disa-

bled.

White Spots Correction Messages

White Spot Correction (continued)

Detecting Screen

Detection Completed Screen

Detection Error Screen

Advertising