JVC VN-V225U series User Manual
Page 13
13
B
Select the [Time Zone].
C
Click [OK].
3 A confirmation screen appears
Click [OK].
Camera restarts using the new IP address. It takes about one minute for the camera to reboot.
Memo:
● Access from the connected computer may fail when the IP address of the camera is changed. To
enable access to camera from the same computer, alter the IP address at the computer accordingly.
When the display or configuration of the opened screen appears strange, check
using the following procedures.
A
Click
[Start]
-
[Control Panel]
-
[Display]
and open the
[Display Properties]
window
B
Click the
[Settings]
tab in the
[Display Properties]
windows and click the
[Advanced]
button
C
Check that
[DPI setting]
in the
[General]
tab has become
[Normal size (96DPI)]
D
Otherwise, change the setting to
[Normal size (96DPI)]
and reboot windows