JVC VN-V225U series - Manual (Page 24)

24
Setting Using Internet Explorer
Camera Page (continued)
( TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
Setting (continued)
K Shutter Speed For setting the shutter speed.
Auto, Auto(1/15 - 1/100)
: Varies the shutter speed automatically according
to the brightness.
1/15 to 1/10000 : Fixed shutter speed.
Flickerless : Reduces flickers due to fluorescent lamps.
[Set values : Auto, Auto(1/15 - 1/100) ( TX), 1/15 (TX), 1/25 (TX), 1/30, 1/50,
1/60, 1/100,1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000, Flickerless]
Memo:
● AAutoB is only recommended when using a manual iris lens.
● Flickers may occur when this is set to a value other than A1/50B, A1/100B, or
AFlickerlessB. When AFlickerlessB is selected, flickers may occur when the
Sense Up feature is used.
● When Sense Up is set to a value other than AOffB, the shutter speed cannot
be set to a value between 1/250 to 1/10000.
L Easy Day and
Night
VN-V25U
VN-X35U only
For setting the Easy Day and Night feature.
Color
: Sets to the color mode at all times.
Black and White : Sets to the black-and-white mode at all times.
Auto : Image color switches to black-and-white when the
luminance level is low.
[Set values : Color, Black and White, Auto]
Memo:
● The threshold of the Auto switching cannot be changed.
L B&W Mode
VN-V26U
VN-V225U series
VN-X235U series
only
For specifying whether to switch the image to the B&W mode.
Auto mode can be specified for switching automatically to the black-and white
mode when the luminance level is low. In auto mode one of three levels can be
selected according to the luminance level.
Color
: Switches to the color mode at all times.
Black and White : Switches to the black-and-white mode at all times.
Auto Low
: Switches to the black-and-white mode when the luminance
of the signal level of the object is low.
Auto Mid : Switches to the black-and-white mode when the luminance
of the signal level of the object is medium.
Auto High : Switches to the black-and-white mode when the luminance
of the signal level of the object is high.
[Set values : Color, Black and White, Auto Low, Auto Mid, Auto High ]
Memo:
● The infrared filter engages and disengages when switching between modes,
which causes mechanism noise.
● During the occurrence of mechanism noise, the distribution sound from the
camera will be muted. (VN-V26U only)
● When AAuto LowB, AAuto MidB or AAuto HighB has been selected, the
camera will change the mode immediately according to the luminance level.