JVC VN-V225U series - Manual (Page 43)

43
Motion Detection Page
This page is for setting motion detection.
This page can be used during access using AadminB or AoperatorB.
Memo:
● When images on the camera are currently acquired by the built-in viewer or another client, video
images may not appear on the [Motion detection] page if it is beyond the distribution capability of the
camera.
● Click [Advanced Settings] to display setting menu.
● Click [Motion detection].
● The area valid for motion detection is displayed in blue.
● When motion is detected, the frame of the built-in viewer turns red.
B C D E F
A
Click