JVC VN-V225U series - Manual (Page 70)

70
Operation
PTZ Settings
(VN-X series only)
This page describes procedures for setting the preset positions.
● This page can be used during access using AadminB or AoperatorB.
To access this setting, you need to set the password of AoperatorB authority.
( A Page 80)
● When a different menu is currently being displayed, click [Control] to switch the menu.
● Click the menu bar on the left side of the screen to open the setting screen.
Operation of Built-in Viewer
(continued)
A
B
C
Click
Ⅵ PTZ Settings