Juniper Networks ERX-1410 - Manual (Page 128)

APPENDIX B
Module Specifications B-6
OC3/STM1 POS
(single mode and multimode)) OC3/STM-1,
HDLC Framing 1:N redundancy 120 W
OC12/STM4 ATM
(single mode and multimode) OC12/STM-4,
ATM:AAL-5 • 1:N redundancy
• SONET APS redundancy a
130 W
OC12/STM4 POS
(single mode and multimode) OC12/STM-4
HDLC Framing 1:N redundancy 120 W
SRP-5G (5 Gbps) Ethernet
(IEEE 802.3)
10/100Base-T
RS-232 1:1 redundancy 100 W
SRP-5G+ (5 Gbps) Ethernet
(IEEE 802.3)
10/100Base-T
RS-232 1:1 redundancy 125 W
SRP-10G (10 Gbps) Ethernet
(IEEE 802.3)
10/100Base-T
RS-232 1:1 redundancy 125 W
SRP-40G (40 Gbps) Ethernet
(IEEE 802.3)
10/100Base-T
RS-232 1:1 redundancy 210 W
SRP-40G+ (40 Gbps) Ethernet
(IEEE 802.3)
10/100Base-T
RS-232 1:1 redundancy 210 W
T3 ATM
(3 ports) ATM/AAL5 1:N redundancy 60 W
T3 FRAME
(3 ports) DS3
Subrate DS3
HDLC Framing 1:N redundancy 60 W
T3 FRAME
(12 ports) DS3
Subrate DS3
HDLC Framing N/A 135 W
TSM IP Tunnels
LNS Termination Multiple TSMs provide
redundancy 130 W
X.21/V.35 HDLC N/A 60 W
a.Not all I/O modules of this type support SONET APS redundancy. See Release Notes for details of which I/O
modules support SONET APS redundancy.
Table B-2 Performance specifications for module assemblies (continued)
Name Capability Redundancy Support Power Use