Juniper Networks ERX-1410 - Manual (Page 39)

Unpacking the ERX-1400 Series
ERX Edge Routers
2-3
Figure 2-2 Lifting the carton off an ERX-1400 series
6
Use a Phillips screwdriver to remove the three screws (10-32 x 3/8 in)
that attach each of the two L-brackets to the router.
7 To move the router more easily from the skid, unscrew one of the
L-brackets from the skid by removing the three screws that attach it
to the skid. See
Figure 2-3 .
Shipping
carton
ERX-1400
system
Clips
Shipping
skid
L-brackets
Clips