GE 45117 GE Wireless Door Alarm with Programmable Keypad - Manual (Page 5)


CREATINGYOURPERSONALALARMCODE
The keypad allows you to set a personal
-digit code for arming and disarming the
alarm.
Remove screw from battery
compartment door located on back
of the unit. Slide off the door in the
direction of the arrow.
Press the LEARN button.
The red light on the front of the alarm
will blink for 1 seconds. During this
time, input your -digit code. A beep
will confirm each input.
The unit will flash a
green light 3 times to
confirm the new -digit
code has been saved.
Replace cover and
secure screw. 1.
2.
3.
.
Learn
button
LEARN