GE 45117 GE Wireless Door Alarm with Programmable Keypad - Manual (Page 9)


frame, the mounting plate mounts
off-center to the left or right in order
to position alarm closest to the edge
of the door.
Using double-sided tape, lightly
attach the magnet to the opposite
edge next to the alarm. Line up the
arrows of the alarm and the magnet.
Ensure the distance between the two
pieces is 1/2” or less. To test the gap
distance, slide the ALARM/CHIME
switch to CHIME and open the door. If
chime sounds, then the gap distance
is correct. If it does not sound, move
either the alarm or magnet closer so
that gap distance is 1/2” or less.
Once you have confirmed the correct
positioning of the magnet and alarm,
lift the alarm off the mounting plate
and apply firm pressure directly to the
3.
.