Part names and their functions – JVC KY-F1030U User Manual

Page 13

Advertising
background image

E9

Part names and their functions

³

Lens mount

Although the lens mount conforms to the
type C mount lens.
Mounting the lens (

page E17)

·

Camera mounting bracket

Although the mounting bracket is mounted
on the bottom of the camera when shipped,
the bracket can also be mounted on the
top of the camera.
Mounting the camera (

page E19)

»

Locking screws for the camera
mounting bracket
(M2.6

×

6mm, 3 units)

CAUTION

Always use the attached screws. Using
screws that exceed 6mm may result in mal-
function of the unit.

When the bracket is mounted on the top sur-
face of the camera, use the provided screws
(length: 10 mm).

¿

Screw holes for mounting the
camera (1/4-inch)

Used when mounting the camera to a fixer
or rotating platform.

´

Side switch panel (inside)

Open the door to access a switch panel
used when making settings on menus.
Side switch panel section (

page E11)

²

[FOCUS] backfocus adjustment
screw

This is adjusted to the optimal wide setting
when shipped from the factory. Should be
readjusted when required by the lens used
in combination with the camera.
Focus adjustment (

page E24)

[LOCK] backfocus locking screw

Screw to lock the backfocus adjustment
mechanism.
Focus adjustment (

page E24)

[Front and bottom]

³

·

»

¿

´

²

Advertising