Connecting through analog output connector – JVC KY-F1030U User Manual
Page 19
E15
AC ADAPTER AA-P700
ON
OFF
POWER
FOCUS
LOCK
Connecting through analog output connector
The image shot by the KY-F1030 can be shown on the computer’s monitor.
AC adapter
Connect the power supply
(
੬
page E18)
MEMO
When the shutter speed becomes slower (slower than 1/7.5s), the image may be seen interrupted.
Also, the image will not freeze even when the external trigger switch is pressed.
PC
Video
capture
board
Microscope
adapter
1.
Connect the KY-F1030’s [ANALOG OUT] connector to the PC’s capture board.
2.
Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power.
3.
Turn ON the PC.
* For instructions on how to operate the video capture board or the employed application
software, see the respective instruction manual.
CAUTION
Use a 1/2-inch C-mount microscope adapter compatible with the microscope to be employed.