JVC UX-A10DVD - Manual (Page 75)

72
English 5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step 4.
6
Press GROUP SKIP ¢ or GROUP SKIP 4
while holding down SHIFT to select the position
where you want to move the group.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step 4.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flashes
while the changes you have made are recorded on the
MD.
Moving a Group—MOVE GR
This function allows you to move a group.
Once a group is moved, the tracks and the other groups are
renumbered.
• To stop any time during the editing process before step 8,
press MD GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very beginning—that is, inserting a disc. You can also edit
an MD during playback (in normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press MD GROUP TITLE/EDIT repeatedly until
“MOVE GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has only one or no groups, you
cannot go on to the following steps.
• During playback:
The group number of the currently playing track will
appear on the right. If the track does not belong to any
group, the group number will be indicated by “– –.”
4
Press GROUP SKIP
¢ or GROUP SKIP 4
while holding down SHIFT to select the group you
want to move.
Ex.: When group 3 is moved to group 10.
Ex.: When group 3 is selected.
Group No. to be
moved from Group No. to be
moved to
EN65_74UX-A10DVD[UB].pm6 02.10.7, 8:11 AM 72