JVC UX-A10DVD - Manual (Page 94)

91
English 6
Adjust the volume level.
1) Press ¢ or 4 repeatedly to adjust the volume
level.
• You can adjust the volume level to “– –” or within
the range of 0 (silent) to 40 (maximum).
• When you select “VOLUME – –,” the volume is
set to the current volume level.
2) Press SET.
The DAILY indicator stops flashing and remains lit.
The contents of this setting appear in the main
display for your confirmation.
7
Press STANDBY/ON (or on the main unit)
to turn off the unit if necessary.
If the unit is already turned on when the timer-on
time comes
The Daily Timer has no affect at all.
About 20 seconds before the timer-on time, the DAILY
indicator and “DAILY TIMER STANDBY” start flashing
on the display.
To turn off the Daily Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until “DAILY
TIMER” appears in the main display.
2 Press CANCEL.
The timer ( ) and DAILY indicators go off from the
display.
To turn on the Daily Timer again
1 Press CLOCK/TIMER repeatedly until “DAILY
TIMER” appears in the main display.
2 Press SET repeatedly until the settings are shown in the
main display for your confirmation.
The timer (
) and DAILY indicators light up on the
display.
The Daily Timer will be canceled and the unit will
not turn off automatically in the following cases:
• When you change the source.
• When you enter the MD editing or title entry mode.
• When you turn off the Daily Timer.
3
Select the source to play back.
1) Press ¢ or 4 repeatedly to select the source.
• Each time you press the button, the source changes
as follows:
• You can also use the source selecting buttons.
• When you select “DVD/CD,” “MD” or “TAPE,”
prepare it for playing back.
• When you select “FM” or “AM,” press SET, then
select a preset number by pressing
¢ or 4.
• When you select “AUX” or “AUX-DIGITAL,”
set the timer function of the external component as
well.
2) Press SET.
The hour digit of the timer-on time starts flashing.
4
Set the timer-on time.
1) Press
¢ or 4 repeatedly to adjust the hour.
You can adjust the hour using the number buttons.
2) Press SET.
The minute digit starts flashing.
3) Press
¢ or 4 repeatedly to adjust the minute.
You can adjust the minute using the number buttons.
4) Press SET.
The hour digit of the timer-off time starts flashing.
5
Set the timer-off time.
1) Press
¢ or 4 repeatedly to adjust the hour.
You can adjust the hour using the number buttons.
2) Press SET.
The minute digit starts flashing.
3) Press ¢ or 4 repeatedly to adjust the minute.
You can adjust the minute using the number buttons.
4) Press SET.
The volume setting appears in the main display.
Ex.: When you set timer-on time to 7:00.
Ex.: When you set timer-off time to 8:00.
MD DVD/CD
TAPE
AM FM
AUX AUX-DIGITAL
EN88_92UX-A10DVD[UB].pm6 02.10.7, 8:12 AM 91