JVC UX-A10DVD - Manual (Page 90)

87
English
Limitting Playback of DVD—Parental Lock
Using this function, you can restrict playback of DVD
containing violent scenes (and those not suitable for your
family members).
• This function is only possible for the DVDs containing
such rating level information—Level 1 (most restrictive)
to Level 8 (least restrictive).
Setting the parental lock
You can set the parental lock only when a DVD is loaded
and playback is stopped.
On the remote control ONLY:
1
Press ENTER while holding down
7.
The PARENTAL LOCK screen appears on the TV.
• When you set the parental lock for the first time,
points to “Country Code.” (Go to step 3.)
• When you change the parental lock settings,
points to “PASSWORD.” (Go to step 2.)
2
Press the number buttons (0 to 9) to enter the
current password (4 digits), then press ENTER.
moves to “Country Code.”
• If you enter the wrong password, “WRONG!
RETRY···” appears. Enter the correct password.
3
Press Cursor 3/2 repeatedly to select a proper
country code, then press ENTER.
moves to “Set Level.”
• For country code list, see pages 100 and 101.
4
Press Cursor
3/2 repeatedly to select a parental
lock level, then press ENTER.
moves to “PASSWORD.”
• Each time you press the button, the parental lock
level changes as follows.
You can play back only the DVD whose rating level
is less than the level you set.
• If you do not want to make any restriction, select “–.”
Country Code
Set Level
PASSWORD
H K
–
– – – –
PRESS KEY ENTER
EXIT
1 2 3 4
8 7 6 5 –
5
Press the number buttons (0 – 9) to enter a new
password (4 digits), then press ENTER.
moves to “EXIT.”
6
Press ENTER.
The parental lock level is set and the PARENTAL
LOCK screen disappears.
To exit from the PARENTAL LOCK screen any time
during the above procedure, press ENTER while holding
down
7.
When you set the parental lock
• If you exit from the PARENTAL LOCK screen before finishing
step 5 , the setting you have made or changed is not stored. Repeat
from step 1 again.
• If you enter the wrong password 3 times in step 2 , moves to
“EXIT” and Cursor 5 and ∞ do not work. Press ENTER to exit
from the PARENTAL LOCK screen, then repeat from step 1 again.
• If you forget your password, enter “8888.”
Unlocking the Parental Lock Temporarily
Some discs cannot be played back at all when the parental
lock is set. If you insert such a disc and try to play it, the
following PARENTAL LOCK screen appears on the TV.
You can unlock the parental lock setting temporarily on this
screen.
On the remote control ONLY:
1
Press Cursor
5/∞ to select “YES,” then press
ENTER.
moves to “PASSWORD.”
• When selecting “NO,” press DVD
0 to remove the
disc.
2
Press the number buttons (0 – 9) to enter the
current password (4 digits).
The parental lock is temporarily unlocked and playback
starts.
• If you enter the wrong password, “WRONG!
RETRY···” appears. Enter the correct password.
If you enter the wrong password 3 times
moves to “NO” and Cursor
5 and ∞ do not work. Press DVD
0 to remove the disc.
• If you forget your password, enter “8888.”
Temporary
Level Change ?
PASSWORD
YES
NO
– – – –
PRESS ENTER EXECUTIVE
This DISC can't play now!
EN83_87UX-A10DVD[UB].pm6 02.10.7, 8:12 AM 87