JVC RD-MD5 - Manual (Page 19)

16
Moving tracks (MOVE function)
Tracks can be moved around so that they are in the desired se-
quence.
Erasing tracks (ERASE function)
This enables unnecessary tracks. Narration, etc. to be erased speed-
ily. The erased parts do not remain as silences but are closed up by
the subsequent tracks.
Erasing all the tracks (ALL ERASE
function)
All the tracks can be erased at once without recording fresh material
over them.
Giving titles to discs and tracks
(TITLE function)
A title consisting of up to 32 characters can be given to a disc and a
track. The title given appears in the display window.
Note: Track marks
These marks are provided to locate the start of each track. Whatever
lies between one track mark and the next is considered to a track.
and the numbers of the tracks (called “track numbers”) are dis-
played in the sequence in which they are to be played.
Track A Track B Track C Track D
Track No.
MOVE
Track A Track C Track D Track B
Track No.
Track A Track B. Track C Track D Erasing
Track B
Track A Track C Track D New tracks can
be recorded.
Track A Track B Track C Track D
Track No.
ALL
ERASE
New tracks can be recorded.
MD
6
SET ENTER
JOG dial
CANCEL
TITLE
EDIT
0
MD
OVER indicator which lights up if the
number of tracks of the MD exceeds 20. Music calender MD indicator
Track number, Playing time
■
Use the Unit to carry out this function.
■
1. Insert an MD to be edited with its label side up.
■
2. Press the MD 6 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
■
3. Press the EDIT button until "DIVIDE ?" is
displayed.
Each time you press the button, the display changes as follows.
Current display
=DIVIDE=JOIN=MOVE=ERASE=ALL
ERASE =(back to the beginning)
■
4. Press the SET button.
■
5. Select the track number to be divided.
Press the 4 or ¢ button or turn the JOG dial to select the
track.
The selected track is automatically played.
■
6. Press the SET button at the point where
the track is to be divided.
• The selected track is divided into two tracks and the track
number in the music calender will increase by 1.
• The recording lasting for 4 seconds starting where the track
was divided is repeatedly played for your reference.
Movement is possible within the POSITION-128 to 128 range
(about 8 seconds before or after the position). Turn the JOG
dial to adjust the position to be divided. The recording lasting
for 4 seconds starting from the position to which the dividing
point has been moved is repeatedly played.
■
7. Press the SET button.
■
8. Press the ENTER button.
The selected track is divided into two tracks and the number of
tracks increases by 1. The new total track number and the total
playback time appear on the display.
■
9. Press the 0MD button to complete editing.
The MD is ejected after "UTOCwriting" is displayed.
Dividing Tracks
(DIVIDE Function)
Playback time of the track
Track to be divided
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
RD-MD5(B)-e.fm Page 16 Wednesday, December 2, 1998 11:40 AM