JVC RD-MD5 User Manual
Page 9
6
The Active Clear Sound circuitry emphasizes the high frequency
range level in conjunction with the bass level so that you can obtain
clear sound at high frequencies. You can use this effect only for
playback.
To get the effect,
press the ACTIVE CLEAR SOUND button on
the Unit or the ACS button on the Remote Control.
The "ACS" indicator lights up and "ACS ON" appears on the dis-
play for 3 seconds.
The "ACTIVE CLEAR SOUND LEVEL" indicator on the Unit will
light when the Active Clear Sound effect is activated because of
great bass level.
To cancel the effect,
press the same button again.
The "ACS" indicator goes out and "ACS OFF" appears on the dis-
play for 3 seconds.
Note:
This function is not effective when playing in monaural.
While the power is turned on, you can see the current time (clock)
at any time.
Press the DISPLAY/CHARA. button on the Unit or the DISPLAY
button on the Remote Control. Each time the button is pressed, the
display changes as follows.
Current sound source (e.g. FM103.50MHz)
=Remaining time of
the MD (if an MD is inserted)
=Clock=(back to the beginning)
Note:
To let work the clock, you need to set the clock beforehand.
(See "Setting the Clock" on page 21.)
ACS (Active Clear Sound) Effect
Showing the Time (CLOCK)
or
or
ACS indicator
RD-MD5(B)-e.fm Page 6 Wednesday, December 2, 1998 11:40 AM