JVC RD-MD5 - Manual (Page 20)

17
• You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5,
or 7 until the display returns to the original display before editing
the track.
Note: While “UTOCwriting” is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
■
Use the Unit to carry out this function.
■
1. Insert an MD to be edited with its label side up.
■
2. Press the MD 6 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
■
3. Press the EDIT button until "JOIN ?" is dis-
played.
Each time you press the button, the display changes as follows.
Current display = DIVIDE = JOIN = MOVE = ERASE = ALL
ERASE = (back to the beginning)
■
4. Press the SET button.
■
5. Select the track number to be joined.
Press the 4 or ¢ button or turn the JOG dial to select the track.
■
6. Press the SET button.
■
7. Press the ENTER button.
The selected track and the previous track are joined and the
number of tracks decreases by 1. The new total track number
and the total playback time appear on the display.
■
8. Press the 0MD button to complete editing.
The MD is ejected after “UTOCwriting” is displayed.
•
You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5,
or 6 until the display returns to the original display before editing
the track.
Note: While "UTOCwriting" is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
■
Use the Unit to carry out this function.
■
1. Insert an MD to be edited with its label side
up.
■
2. Press the MD 6 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
■
3. Press the EDIT button until "MOVE ?" is dis-
played.
Each time you press the button, the display changes as follows.
Current display =DIVIDE=JOIN=MOVE=ERASE=ALL
ERASE =(back to the beginning)
■
4. Press the SET button.
■
5. Select the track number to be moved.
Press the 4 or ¢ button or turn the JOG dial to select the
track.
Example: Track number 12.
■
6. Press the SET button.
■
7. Select the destination to which the track is
to be moved.
To select the track number, press the 4 or ¢ button or turn
the JOG dial to select the track.
In this example, the 12th track will move to the 14th track.
(Since, the 12th track is lost, the upper tracks than the 12th one
will be shifted toward the younger tracks.)
■
8. Press the SET button.
■
9. Press the ENTER button.
The selected tracks are moved. The total track number and the
total playback time appear on the display.
■
10. Press the 0MD button to complete editing.
The MD is ejected after "UTOCwriting" is displayed.
•
You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4
through 8 until the display returns to the original display before ed-
iting the track.
Note: While "UTOCwriting" is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
■
Use the Unit to carry out this function.
■
1. Insert an MD to be edited with its label side
up.
Joining Tracks
(JOIN Function)
Moving Tracks
(MOVE Function)
Selected track Track to be joined
Erasing Tracks
(ERASE Function)
Track to be moved
Destination track Track to be moved
RD-MD5(B)-e.fm Page 17 Wednesday, December 2, 1998 11:40 AM