JVC HM-DSR100U - Manual (Page 104)

Page 5-12
User and
Installation Guide
S
UPERIMPOSE
This function, which can be switched on or off, determines whether or not the recorder's
operational indicators will appear on the TV screen. Do the following:
1. Press the Mode button until the remote is in
the SAT mode.
2. Press the Menu button to open the
Main Menu .
3. Select the VCR Setup option.
4. Press the arrow buttons to move the
highlight to Superimpose in the
Options list.
5. Press the Select button to remove the
checkmark from the checkbox next to
Superimpose . Pressing the Select
button again will put a checkmark
there again.
6. Press the arrow buttons to move the
highlight to Save .
7. Press the Select button to save all
changes.
Remote
Menu Options
Buttons
MENU
MODE
8 VCR Setup 8
SELECT
SELECT
Superimpose
Save
Note:
ࡗ When the
View button is pressed, all indications corresponding to the current status are
displayed for 5 seconds.