JVC HM-DSR100U - Manual (Page 130)

Page 6-4
User and
Installation Guide
C
OMPONENTS OF THE
S
ATELLITE
A
NTENNA
Note: The following pictures are not to scale.
The fully assembled satellite antenna looks like this.
Following are descriptions of each piece of the satellite
antenna.
LNBF (L
OW
N
OISE
B
LOCK
D
OWNCONVERTER WITH INTEGRATED
F
EEDHORN
)
The "dish" focuses the signals transmitted from the satellites onto the LNBF. The LNBF
amplifies the signals, converts the whole "block," or range of signals to a lower frequency,
and "feeds" the signals into the coaxial cable(s) connected to your recorder(s).
LNBF - S
INGLE
O
UTPUT
If you purchased the single-output LNBF to use with the
recorder, your package contains this LNBF. Note that this
LNBF has only one coaxial cable connection.
LNBF - D
UAL
O
UTPUT
The dual output LNBF supplied with the HM-DSR100DU and
be used with more than one receiver. Note that this LNBF has
two coaxial cable connections.
LNBF S
UPPORT
A
RM
The LNBF support arm attaches the LNBF and the dish to the
mast assembly.