Jameco Electronics 487023U - Manual (Page 11)

Windows 98 Setup
After installing the USB Network Adapter, follow
the instructions below to install the adapter’s soft-
ware.
1. Install the USB Network Adapter if you haven’t
already.
2. Start up your computer and Windows 98.
3. At this point, Windows 98 should display a
“New Hardware Found” window.
If the message is not displayed, and this is the first
time that you are using the device, check to make
sure that the USB port on your computer is
enabled. Usually, there is a toggle switch on the
motherboard of your PC or a setting option in the
PC’s BIOS that turns the USB port on and off.
Consult your PC’s user guide to learn how to
enable your computer’s USB port.
4. When you see the New Hardware Found mes-
sage, continue on the step 5.
5. While the Update Device Driver Wizard win-
dow is visible, put the USB Network Adapter pro-
gram diskette into drive A and click on Next. A
window will apear and ask you What would you
like Windows to do?
7
Windows 98