Jameco Electronics 487023U - Manual (Page 16)

Make sure that Shared-level access control is
selected. If the setting is on User-level access con-
trol and you can’t change it, skip to problem 5 in
the Troubleshooting section.
21. Click on the OK button. Your system may or
may not ask you to insert your Windows 98 CD-
ROM or Diskette. If it does, insert your disk into
the proper drive and direct Windows to it.
22. Once Windows is done copying the necessary
files, the System Settings Change window
appears. Remove all disks from your computer
and click on Yes to restart your PC. If you don’t
see this window, simply close down Windows 98
and restart your computer.
The driver installation is complete.
23. Once the computer has restarted and Windows
is up, a Logon window will appear requiring you
to enter a username and password. Make up a
username and password, enter them, and click
OK.
Do not click the Cancel button, or you won’t be
able to log onto the network. If the logon window
does not appear or if it does not allow you to log
on, refer to the problem number 3 in the trou-
bleshooting section.
24. Once you are at the Windows 98 desktop, dou-
ble-click on the Network Neighborhood icon.
You should see the names of the other PCs on the
12
Windows 98