Jameco Electronics 487023U - Manual (Page 12)

6. Select Search for the best driver for your device
(Recommended). Click Next.
7. A window will appear asking Where would you
like Windows 98 to search for the driver? Make
sure that Floppy disk drive is selected and that a:\
is specified in the location window. Click Next to
continue.
8. Windows will begin searching your drives for
the correct device drivers. If a message appears
that reads Windows found the following updated
driver for this device, go to step 9.
If a window appears that reads Windows was
unable to locate the driver for this device, skip to
problem 2 of the Troubleshooting section.
9. After Windows detects the proper network
adapter device driver on the disk, click on the
Finish button when it appears.
10. When the Insert Disk message appears, click
OK.
11. When the Copying Files... window appears,
type a:\ into the box displayed and click OK. Note
that all of the files that Linksys provides begin
with the name USB10T. If at any time Windows
asks you to supply any other files, insert the
Windows 98 CD-ROM or disks as needed, direct
Windows to the proper location, and click OK.
For example, if you have a Windows 98 CD-ROM,
and it is located in drive D, you would type
d:\win98 and press Enter when asked to supply
the path to the CD-ROM.
8
Windows 98