Jameco Electronics 487023U - Manual (Page 25)

Manually Installing
Network Components
There may be times when you might need to man-
ually install missing Windows 98 networking com-
ponents.
1. Click on Start, Settings, then Control Panel.
2. Double-click the Network icon. The Network
window appears.
3. Click on the Configuration tab. Make sure that
the following network components are installed:
Client for Microsoft Networks
Client for NetWare Network
Linksys USB-Network Adapter
IPX/SPX-compatible Protocol
NetBEUI
There may be other components listed in addition
to the ones shown above. If any of the above com-
ponents are missing, add them as follows:
Client for Microsoft Networks
If you plan on connecting to an NT file server or
peer-to-peer network, click on the Add button.
Highlight Client and click on Add. In the Network
Client box, highlight Client for Microsoft
Networks and click OK.
Appendix
21