Jameco Electronics 487023U - Manual (Page 22)

you have made sure that it is Unchecked click on
the OK button.
Problem 5: On the Access Control Tab, User Level
Access is selected, but Shared Level Access is
grayed out and not accessible.
Solutions
You previously had your primary network logon
set to Client for Netware Networks. On the
Configuration Tab of the Network Properties win-
dow, make sure that your primary network logon
is set to Client for Microsoft Networks.
Problem 6: In Network Neighborhood you can
only see your self and no other computers on the
network.
Solutions
Make sure that the cables are connected correctly.
Make sure you are getting Link or Activity lights
on the USB adapter and a Link light on your hub
or switch. If the lights are out, try changing to a
new USB or RJ-45 cable that you know is work-
ing.
Your hub must be a 10BaseT or 10/100 auto-sens-
ing hub, or you must use a switch.
Your workgroup name may be different from other
computers on your network. Make sure each PC
on the network is using the same workgroup
name.
18
Appendix