Main features – JVC BR-DV6000 User Manual

Page 4

Advertising
background image

4

Thank you for purchasing our

DV Video Cassette Recorder

BR-DV6000.

DV format

High picture and sound quality by digital technology.

Compatible mechanisms for standard/mini DV cas-

sette tapes
It records on and plays back DV cassette tapes of the
standard and mini size. (SP mode only)
Recording in the DV format can be performed on
DVCAM cassette tapes.

Only PAL/NTSC DVCAM tapes are detected auto-

matically in playback mode.

Equipped with composite, component and Y/C in-

put & output terminals.

Equipped with DV IN/OUT terminals. (IEEE1394)

It can exchange digital signals with IEEE1394-compat-
ible devices.

Both NTSC and PAL signals supported

BR-DV6000 can playback or record PAL tapes through
the DV input. For PAL, please set the PB/DV IN menu
item to PAL.
For analog signal input, only NTSC is supported.

RS-422A and JVC bus interface supported

RS-422A-compatible edit controller RM-G820 and JVC
bus-compatible edit controller RM-G800/G805 can be
used for editing.

Optionally, the RS-232C interface can be used.
Recording and playback of time codes
Time code I/O terminal

Slave lock is allowed if BR-DV6000 is connected to an
external time code generator.

SYNC IN terminal

External synchronization signals can be input.

Audio-dubbing function (after-recording)

If the sampling frequency is 32 kHz, audio dubbing can
be performed into CH3 and CH4 (except during DV in-
put).

Backup recording function

With the combined use of other DV machines, long-time
continuous recording is possible.

Using the SERIAL REMOTE OUT terminal or DV ter-

minal, dubbing with other recorders is possible only
with playback operation by BR-DV6000. (Replication
function)

Equipped with a 2.5-inch color LCD

Images, status display and menu display can be viewed.

Multi-cue up

Up to 5 points of the tape position can be registered
and cued up.

Index/blank search function

It can search for positions where index signals are re-
corded and unrecorded parts.

Repeat play function

There are 3 types of repeat function.
(INDEX/ VIDEO END/ TAPE END)

Recording/playback with an external timer
With the use of the network board SA-DV6000 (sold

separately), image and audio streaming data can be
recorded on a CF card, and with a LAN card, stream-
ing data can be transmitted to a PC.

With the XLR IN board SA-X61U or XLR OUT board

SA-X62U (sold separately), audio input/output via
the XLR terminal is possible.

As this is a DV-format video cassette recorder,
video cassettes with the

or

logo can

be used with it.
DVCAM cassettes can be recorded in the DV
format.

● In order to prevent crumpling due to tape

slack, do not perform important recording
within the first and last 2 – 3 minute-run of
the tape.

● Recorded video (sound) is meant for per-

sonal entertainment only and must not be
used for other purposes without the prior
consent of the copyright owner.

● JVC shall not guarantee the quality of re-

cording and playback should BR-DV6000 fail
to function normally due to defects, either
of the unit itself or the video cassette tapes.

MAIN FEATURES

DV6000U_02-027_Eng.p65e

06/03/03, 11:38 PM

4

Advertising