JVC BR-DV6000 - Manual (Page 79)

79
VIDEO Menu screen
Item Setting Description
ⅷ Y/C
COMPONENT
ⅷ OFF
ON
ⅷ OFF
ON
VIDEO
INPUT SEL
SET UP
(NTSC)
BLACK
BURST
PAGE BACK
For selecting the input video signals when the INPUT SELECT
switch on the front panel is set to Y/C (CPN).
Y/C
: YC separate signals
COMPONENT : Component video signals
For enabling/disabling the application of setups to analog video
signals (composite, Y/C and component).
(During recording and playback)
OFF
: Does not apply setups.
ON : Applies setups.
Memo
The application of setups on playback or recorded video signals
must match the setting of SET UP. Otherwise, if dubbing is re-
peatedly performed, the hue and brightness of the video may not
appear normal.
For enabling/disabling output of black burst signals of the built-in
signal generator. (When analog input is selected)
OFF
: Output off
ON : Output on. In the RECORDING mode, black burst
signals will be recorded.
For returning to the TOP MENU screen.
DV6000U_72-104_Eng.p65e 06/03/03, 11:41 PM 79