John Lewis JLTDH15 - Manual (Page 12)

2. Press the Delicate button - the LED
above is on.
To deselect the function press the Delicate
button again. LED above is off.
Intensive
If the laundry is still damp after a standard
drying programme, you can increase the
drying result by using the Intensive function.
1. Choose the drying programme.
2. Press the Intensive button - the LED
above is on.
To deselect the function press the Intensive
button again. The LED above is off.
Anti-crease
This function prolongs the anti-crease phase
to 90 mins in total. The drum rotates in
intervals during this phase. The laundry
therefore remains relaxed and free of
creases.
To activate it:
1. Choose the drying programme.
2. Press the Anti-crease button - the LED
above is on.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can
be removed at any time during the anti-
crease phase.
To deselect the function press the Anti-
crease button again. The LED above is off.
Press the Anti-crease button. A 90 minute
anti-crease phase is set. The display now
shows the anti-crease icon. If this additional
function is selected, the anti-crease phase at
the end of the drying cycle is lengthened by
60 minutes. The laundry can be removed at
any time during the anti-crease phase.
Alarm
The appliance is supplied with the Alarm
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anti-crease phase starts or
ends
– When the cycle is interrupted
To activate it:
1. Choose the drying programme.
2. Press the Alarm button - the LED above
is on.
12