John Lewis JLTDH15 - Manual (Page 20)

1. Open door in plinth: To do this, press
the release button on the right and
open the door in the plinth to the left.
2. Pull the filter housing out of the base by
the handle.
1
1
2
3. To clean the fluff filter: Remove filter
from filter housing. To do this, press the
pressure points on the sides and pull the
filter frame up and out of the housing.
Remove fluff from the fluff filter with a
damp hand.
4. Use a damp hand to remove the fluff
from the filter in the base . If necessary
pull out and clean the filter with warm
water using a wiper or brush. Clean the
inside of the door, the fluff filter
chamber and the rubber seals of fluff.
Insert the fluff filter to the base.
5. Insert the fluff filter into the filter
housing (it has to audibly lock) and slide
it inside the filter chamber. Close the
door in plinth. Note: If the fluff filter is
not inserted in the filter housing, the
filter housing cannot slide into the
appliance base.
20