John Lewis JLTDH15 - Manual (Page 14)

holding down the Delicate and Intensive
buttons simultaneously for 5 seconds.
– Before programme is started:
Appliance cannot be used
– After programme is started:
Programme in operation cannot be
changed
The icon appears in the display to
indicate that the child safety device is
activated.
The child safety device is not deactivated
once the programme comes to an end.
If you want to set a new programme, you
must first deactivate the child safety device.
Starting the programme
Press the Start/Pause button. The
programme starts.
The programme progress is shown by
elapsing Dry time on LCD.
Changing programme
To change a programme which has been
selected by mistake once the programme
has started, first turn the programme
selector to Off and then reset the
programme.
The programme can no longer be
changed directly once the
programme has started. If however
there is an attempt to change the
programme on the programme knob,
the programme progress display and
the maintenance indicators flash. If an
option button (excluding the Alarm
button) is pressed, Err appears in the
multidisplay.
The drying programme is not
however affected by this (laundry
protection).
Putting in extra items or
taking items out before
end of programme
1. Open loading door.
Warning! Laundry and drum can
become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must
audibly lock.
4. Press the Start/Pause button to
continue the drying cycle.
14